How and When to Alter a Car Battery?

It’s one of the most frequently asked questions when it comes to taking care of your car is how and when do you alter or change your car battery.

Modbury Battery
Created by Modbury Battery
On Aug 22, 2017
Help Translate This Item

How and When to Alter a Car Battery?

It’s one of the most frequently asked questions when it comes to taking care of your car is how and when do you alter or change your car battery.

The car batteries in Adelaide are tough enough. They require equipments like the safety glasses, rubber gloves, wrenches, sockets with extensions and driver, baking soda, brush, water and rust proof spray paint while changing them.

Need to replace the car battery?
Conventional batteries when chemically fit work best. When the battery life reaches its end, the vehicle does not crank. If you know you haven’t left an electronic thing on, without delay replace the battery as it has reach the end of its life. While even if the crank slows suddenly and then resume again as normal, replace the battery if it is four years or older than that.

Warning signs
Unexpected failures to crank or sudden slow cranking are some of the warning signs.

Testing the battery
Auto parts stores, car dealers and even the battery distributors use different battery testers to settle on the testing of Cold Cranking Amps (CCA) adjacent to published ratings. If the tested value is at a lesser amount than 80 percent of precise CCA, it is recommended to replace the battery.

Proper ways to take the old battery out for car battery repair
It is compulsory to wear the safety glasses and the latex gloves are also required. First detach negative battery cable and then the positive one. Than slowly release and remove the lower battery hold down bolt and hold down the battery bracket. And finally remove the battery out of the car for car battery service.

Cleaning the compartment
Clean the compartment with a mix of warm water and the baking soda. When first functional to the battery compartment, the mix will foam demonstrating the existence of the battery acid. Keep applying the mix till the foam action has stopped up. This indicates that the acid has been completely neutralized. You can now rinse the complete area with clean water.
 
Installing the new battery
Install the battery and then reinstall the battery by holding down the bracket and the bolt. Ensure that the things are secure into the battery tray. Have the positive cable installed and then the negative one. 

What shall I do with the older battery?
With car battery replacement the older batteries have a recycle value. Exchange it when getting a new battery; otherwise you will be likely to pay the core charge.