Choosing the Right Salt Spreader to Combat Ice

If you are tired of spreading salt manually over a larger area, a salt spreader can be of great use to you. It is a common thing that after a snowfall, parking lots and sidewalks become slippery and are prone to cause accidents. In such scenarios, salt works like a magical spell. If you have been living under the rock, you may not know that salt can be used to melt the ice. It lowers the freezing point of the ice, and thus prevent accidental driving conditions. As a consumer or a contractor, you may be overwhelmed by the number of choices available in the market when it comes to choosing a spreader of salt. Read this article to get a clearer picture on how to find the right one according to your specific requirements.

Choosing The De-Icing Material

To get the best material for your project, at first you need to consider the surface that is in question. Not all materials work the all surfaces. For instance, parking garages are treated with magnesium chloride to deal with the corrosion of the pre-cast concrete panels, on the contrary, treatment of sensitive concrete surfaces are usually done with materials like calcium chloride. An effective way to save cost is to have similar de-icing requirements that can reduce the variety of de-icing material taken into account.

Looking At The Capacity

Once the de-icing is selected, you need to make sure that the capacity chosen is appropriate, not more, not less. Salt spreaders ranges from 75 lb capacity push spreaders to gigantic 4 cubic yard truck mounted systems that can hold around 8,000 lbs of material. There are special liquid spray systems for individuals who want to de-ice using liquid materials. Determining which capacity best fits your needs will depend on the material capacity needed for the specific job and also for the entire route involved. Balancing the two needs is crucial to maintaining efficiency.

Design

Once the best material, the capacity of the spreader, the style to best accommodate the average job size is found out for the job, there will remain few more aspects to narrow down the choice. The differences now will be between the design of the Salt Dogg salt spreader and materials they are made up of.

Application Control

There are various controls for how a spreader applies on a de-icing material. Some make use of a single adjustment lever to control both spinner speed as well as flow rate. Some utilize a manual rear gate that can be elevated or lowered to increase/reduce the flow. Although, there are provisions to manually adjust the flow rate with these mechanisms, they are not the most accurate ones and you will need to stop and exit the truck manually every time you need to make adjustments on the spreader.

These key points will certainly narrow down the option of choosing a spreader of salt on the market to the ones that will fit your needs.

Author: The author is a blogger and the article is about salt spreader.