How Can You Fix Pop Specs Lenses by Yourself at Your Home?

Well, your lenses have fallen out from your Rx safety glasses. But it doesn’t mean, you need new eyewear now. In many cases, you can fix your popped eyewear lenses without any help of eye care professional. Many frames are easy for fixing lenses just put them gently into its exact place. Some need a little skill. Below here are few tips that how can you fix easily a popped specs lenses.

• Usually, plastic frames are easily fix popped lenses and with the aid of little force, you can easily fix them. If it doesn’t work, try this method.
• You should make sure that the frame is not cracked or snapped. If it is really cracked, you have to go professional optician.
• If it is not cracked, you are lucky that you can fix it without any professional repair.
• In another way, put a plastic frame in warm water that should not be hot enough. It will make the plastic soften and can mold easily for fixing the lenses.
• After warming up the plastic frame, take out the safety glasses from water and place the fell out lenses in the frame.
• Hold tightly the frame, press the lowest part of lenses into its hollow.

• Metal frames usually hold the lenses with the small screw. If the lenses have fallen out, it can because of loose or loss of screw.
• Before getting the lens back in the frame, you make sure the original screw is present in its original place. If a screw is not its original place, buy a new screw of the same size and fit this screw with the help of a screwdriver.
• If the original screw in its place and become loose. Lose it and put the lenses in the frame and there will be a groove from the edges. Don’t tighten it.
• As the lenses are in its place, hold the frame firmly with one hand and screw with the other.

• If you are dealing with designer glasses Online and fixing the popped lenses, a semi-rimless frame is one of the trickiest kinds. Many frames have a metal bar on the top and thin as well and clear wire is made of nylon or maybe some other lightweight material. That wire goes along the bottom and holds the lens in one place. For putting the lenses back in the frame, you will have to apply some trick the clear wire. For this trick, take a thin strip to make the envelopes. Cut a long and rectangular strip that should ten inches long. After this follow these instructions,
• Find the groove that runs along the metal bar and it will be top of the frames.
• Hold firmly in its place and insert tear-proof strip between the lens and clear wire.
• Fold the whole paper over the clear wire and softly pull down. It’s better to use paper for pulling the wire into the groove at the lens bottom where it will fit.
• Start to pull from one end to bottom until the wire is back in its place.
• Pull out tear-proof strip by moving it in the center of the wire and secure the wire with the holding of thumb by pulling it slowly.

Supposed you have tired from everything to fix fell out prescription safety glasses lenses. Well, we didn’t mean to throw out your old eyewear just because the lens fell out. But we think you must have to change eyewear that must be trendy. You can get prescription safety glasses online of any brand from any website like eyeweb.com that have fashion-forward frames of every style.